西門子1500PLC代理商SIMATIC S7-1500 系統(模擬量模塊和工藝模塊)提供了一個簡易屏蔽連接套件,無需使用工具即可安裝。 此套件包含一個 24 V DC 饋電元件、一個屏蔽夾和一個通用屏蔽端子。 該屏蔽端子可用于單根細干線電纜、多根細干線電纜或一根粗干線電纜。 由于對 24 V DC 電源和測量信號進行分離,并且在屏蔽和信號電纜之間具有低阻抗連接,因此可確保較高的 EMC 穩定性和抗干擾性。
可插入到 I/O 模塊中(10 張 DIN A4 標簽紙,每張標簽紙帶有 10 個標簽,預穿孔,可使用標準激光打印機進行打??;可用顏色: Al 灰)
• 屏蔽連接:
SIMATIC S7-1500 系統(模擬量模塊和工藝模塊)提供了一個簡易屏蔽連接套件,無需使用工具即可安裝。 此套件包含一個 24 V DC 饋電元件、一個屏蔽夾和一個通用屏蔽端子。 該屏蔽端子可用于單根細干線電纜、多根細干線電纜或一根粗干線電纜。 由于對 24 V DC 電源和測量信號進行分離,并且在屏蔽和信號電纜之間具有低阻抗連接,因此可確保較高的 EMC 穩定性和抗干擾性。
• 統一的 40 針前連接器
• I/O 模塊的前門或自組裝背板總線的 U 型連接器等其它附件
標準型 CPU
• CPU 1511-1 PN:
適用于對程序范圍和處理速度具有中等要求的應用,用于通過 PROFINET IO 進行分布式配置。
• CPU 1513-1 PN:
適用于對程序范圍和處理速度具有中等要求的應用,用于通過 PROFINET IO 進行分布式配置。
• CPU 1515-2 PN:
適用于在程序范圍、網絡和處理速度方面具有中等/較高要求的應用,可通過 PROFINET IO 進行分布式配置;可以使用具有單獨 IP 地址的附加集成 PROFINET 接口,例如,用于網絡分離。
for smaller applications with medium requirements on the program scope and processing speed, for distributed setup via PROFINET IO.
• CPU 1515T-2 PN:
for applications with medium/high requirements on the program scope, networking and processing speed. For distributed configuration via PROFINET IO. The additional integrated PROFINET interface with separate IP address can be used, for example, for network separation, for connecting further PROFINET IO RT devices, or for high-speed communication as an I-Device.
• CPU 1517T-3 PN/DP:
for applications with very high requirements regarding program scope, networking and processing speed. For distributed configuration via PROFINET IO and PROFIBUS DP. The additional integrated PROFINET interface with separate IP address can be used, for example, for network separation, for connecting further PROFINET IO RT devices, or for high-speed communication as an I-Device.
• CPU 1517TF-3 PN/DP:
for standard and fail-safe applications with very high requirements regarding program scope, networking and processing speed. For distributed configuration via PROFINET IO and PROFIBUS DP with PROFIsafe. The additional integrated PROFINET interface with separate IP address can be used, for example, for network separation, for connecting further PROFINET IO RT devices, or for high-speed communication as an I-Device.
All SIMATIC S7-1500 CPUs support motion control functions. STEP 7 provides motion control instructions that are standardized in accordance with PLCopen for configuring and connecting a drive to the CPU.
Motion control with the S7-1500 supports the following technology objects:
• Speed-controlled axes
• Positioning axes
• Synchronized axes (relative synchronism with synchronization, without specification of the synchronous position, setpoint linkage)
• External encoders
• Cams
• Cam track
• Probe
The technology CPUs of the SIMATIC S7-1500 offer advanced motion control functions:
• Extended synchronous operation functions nchronization with specification of the synchronous positio
o Camming
• Cam disk
• Up to 4 encoder or measuring systems as actual position for position control